Key Features & Potential Benefits
Mobil 1™ ESP x2 0W-20 is an advanced full synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1 ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1 ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP Formula 5W-30.
| Features | Advantages and Potential Benefits |
| Active cleaning agents | Helps to prevent the buildup of harmful deposits to enable long and clean engine life**. Provides outstanding engine cleanliness and sludge control. **Compared to vehicle manufacturer standard |
| Outstanding thermal and oxidation stability | Helps to reduce oil aging allowing extended drain interval protection |
| Enhanced frictional properties | Provides up to 4% fuel economy improvement versus Mobil 1 ESP Formula 5W-30*** ***Savings would be based on switching from a higher viscosity motor oil, similar to Mobil 1 ESP Formula 5W-30, to a 0W-20 viscosity grade. Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity. |
| Excellent low temperature capabilities | Quick cold weather performance to help provide fast protection at start-up |
| Outstanding high temperature capabilities | Provided outstanding high temperature protection over the entire oil drain interval** **Compared to vehicle manufacturer standard |
| Wear protection | Provides outstanding wear protection over the full oil drain interval** **Compared to vehicle manufacturer standard |
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline and diesel engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
- Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
- Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
Approvals & Specifications
| This product has the following approvals: |
| MB-Approval 229.71 |
| Porsche C20 |
| VW 508 00 |
| VW 509 00 |
| GM dexosD Licensed (DD0753IA015) |
| STJLR.51.5122 |
| STJLR.03.5006 |
| This product meets or exceeds the requirements of: |
| API SN Engine Test Requirements |
| API SL |
| ACEA C5 |
Typical Properties
| Property | |
| Grade | SAE 0W-20 |
| Ash, Sulfated, mass%, ASTM D874 | 0.8 |
| Density @ 15.6 C, g/cm3, ASTM D4052 | 0.843 |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 235 |
| Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 | 2.6 |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 7.8 |
| Pour Point, °C, ASTM D97 | -51 |
| Viscosity Index, ASTM D2270 | 175 |
- Key Features & Benefits
Key Features & Potential Benefits
Mobil 1™ ESP x2 0W-20 is an advanced full synthetic engine oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability and advanced fuel economy* to keep your engine running like new. Mobil 1 ESP x2 0W-20 is our latest technology combining durability and protection with a low viscosity, low friction engine oil that was designed in cooperation with key European Original Equipment Manufacturers (OEMs). Mobil 1 ESP x2 0W-20 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles that require SAE 0W-20 viscosity grades.
* compared vs Mobil 1 ESP Formula 5W-30.
Features Advantages and Potential Benefits Active cleaning agents Helps to prevent the buildup of harmful deposits to enable long and clean engine life**. Provides outstanding engine cleanliness and sludge control. **Compared to vehicle manufacturer standard
Outstanding thermal and oxidation stability Helps to reduce oil aging allowing extended drain interval protection Enhanced frictional properties Provides up to 4% fuel economy improvement versus Mobil 1 ESP Formula 5W-30*** ***Savings would be based on switching from a higher viscosity motor oil, similar to Mobil 1 ESP Formula 5W-30, to a 0W-20 viscosity grade. Actual savings are dependent upon vehicle and engine type, outside temperature and barometric pressure, driving conditions and your current engine oil viscosity.
Excellent low temperature capabilities Quick cold weather performance to help provide fast protection at start-up Outstanding high temperature capabilities Provided outstanding high temperature protection over the entire oil drain interval** **Compared to vehicle manufacturer standard
Wear protection Provides outstanding wear protection over the full oil drain interval** **Compared to vehicle manufacturer standard
- Applications
Applications
Mobil 1 ESP x2 0W-20 is recommended for the new high-performance gasoline and diesel engines found in emerging European vehicles that require SAE 0W-20 viscosity grades.
- Mobil 1 ESP x2 0W-20 can only be used in the vehicles for which it is approved. It is not backward compatible with older vehicle engines.
- Mobil 1 ESP x2 0W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
**** Always consult the owner's manual of the vehicle for the manufacturer's recommended viscosity grade and specifications
- Approvals & Specifications
Approvals & Specifications
This product has the following approvals: MB-Approval 229.71 Porsche C20 VW 508 00 VW 509 00 GM dexosD Licensed (DD0753IA015) STJLR.51.5122 STJLR.03.5006 This product meets or exceeds the requirements of: API SN Engine Test Requirements API SL ACEA C5 - Typical Properties
Typical Properties
Property Grade SAE 0W-20 Ash, Sulfated, mass%, ASTM D874 0.8 Density @ 15.6 C, g/cm3, ASTM D4052 0.843 Flash Point, Cleveland Open Cup, °C, ASTM D92 235 Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 2.6 Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 7.8 Pour Point, °C, ASTM D97 -51 Viscosity Index, ASTM D2270 175
